Project Details
Inputs
Standards / Base Dimensions
OD Min
0.0 mm
OD Max
0.0 mm
Wall Thickness Min
0.0 mm
Wall Thickness Max
0.0 mm
Nominal Wall Thickness
0.000 mm
Calculated as OD / SDR
Maximum Allowable Operating Pressure
0.00 MPa
PN 0 @ 20°C
Thermal Results
New OD Min
0.000 mm
Change: 0.000 mm
New OD Max
0.000 mm
Change: 0.000 mm
New Wall Thickness Min
0.000 mm
Change: 0.000 mm
New Wall Thickness Max
0.000 mm
Change: 0.000 mm
New Length
0.000 m
Change: 0.00 mm
Thermal results use nominal OD and nominal wall thickness.
Disclaimer
This calculator provides indicative thermal expansion and contraction values based on AS/NZS 4130 reference dimensions at 20°C and a linear coefficient of expansion. Results are for guidance only and do not account for installation restraint, end load, creep, pressure effects, temperature gradients, material batch variation, or project-specific design requirements. The user is responsible for checking all inputs and verifying suitability against the applicable standard, manufacturer data, and project requirements before use.